Images shown are for reference only. Product specifications, packaging, and appearance may differ based on brand or batch.
16.00 USD
Yaseen Construction Products supplies Polysulphide Sealant for sealing expansion, construction and movement joints in suitable concrete and building assemblies.
Polysulphide sealants are elastomeric compounds formulated to accommodate specified joint movement while helping restrict water and contaminant ingress. Selected grades are available in gun-grade and pouring-grade consistencies for vertical and horizontal applications.
We supply and export Polysulphide Sealant to regions including the UAE, Saudi Arabia, Qatar, Oman, and various African countries. Our efficient logistics network ensures timely delivery tailored to your project requirements.
Polysulphide Sealant is an elastomeric joint-sealing material formulated to accommodate movement between adjacent construction elements while maintaining a flexible seal.
Two-component polysulphide sealants generally consist of a base compound and curing agent. When mixed in the manufacturer’s specified ratio, the material undergoes a chemical curing reaction and develops an elastomeric seal.
Depending on the formulation, polysulphide sealants are used in concrete expansion joints, industrial floors, building facades, precast concrete connections, water-retaining structures and selected infrastructure applications.
Yaseen Construction Products sources polysulphide joint sealants for waterproofing contractors, civil engineering companies, industrial flooring specialists, infrastructure developers and project procurement teams.
A non-sag formulation designed for application with suitable joint-sealing equipment.
Typical applications include:
Vertical concrete joints.
Building facade joints.
Precast panel joints.
Wall and structural movement joints.
Selected overhead or inclined joints.
Non-sag performance depends on the specific formulation and joint dimensions.
A flowable formulation designed for placement into suitable horizontal joints.
Common applications include:
Concrete floor expansion joints.
Industrial pavement joints.
Horizontal movement joints.
Selected road and infrastructure joints.
The joint must be prepared and sealed at the base to prevent leakage of uncured material.
Certain polysulphide sealants are supplied as ready-to-use, moisture-curing products.
Their curing mechanism, allowable joint dimensions and service performance differ from two-component formulations.
The product should be selected according to the approved specification rather than assuming all polysulphide sealants are equivalent.
Specialised grades may provide resistance to selected fuels, oils, chemicals or industrial contaminants.
Chemical resistance depends on the formulation, concentration, temperature and exposure duration.
Suitable grades may be specified for movement joints in water tanks, treatment facilities and other water-retaining structures.
The selected product must be approved for the intended water exposure, immersion conditions and relevant hygiene requirements.
| Parameter | Specification / Selection Criteria |
|---|---|
| Product | Polysulphide Sealant |
| Polymer Type | Polysulphide Elastomer |
| Components | One-Component or Two-Component |
| Consistency | Gun Grade or Pouring Grade |
| Curing Mechanism | According to formulation |
| Mixing Ratio | Manufacturer specified for two-component grades |
| Pot Life | Product and temperature dependent |
| Tack-Free Time | Manufacturer dependent |
| Full Cure Time | Joint dimensions and conditions dependent |
| Movement Capability | Manufacturer-declared classification |
| Shore Hardness | According to selected grade |
| Tensile Properties | Manufacturer specified |
| Elongation | Grade dependent |
| Elastic Recovery | According to applicable test method |
| Adhesion | Substrate and primer dependent |
| Service Temperature | Manufacturer specified |
| Chemical Resistance | According to formulation |
| Packaging | Cartridges, Sausages or Multi-Component Kits |
Actual movement capability, curing time, hardness and chemical resistance must be verified against the selected manufacturer’s technical data sheet.
Concrete and building components experience movement due to temperature changes, shrinkage, moisture variation, loading and structural displacement.
A properly designed movement joint provides space for this movement.
Polysulphide sealant is installed into the joint to form a flexible barrier between adjacent surfaces.
Its performance depends on:
Joint width and depth.
Expected movement.
Sealant movement classification.
Surface preparation.
Primer compatibility.
Backing material.
Two-sided adhesion.
Mixing and application conditions.
Curing.
Water and chemical exposure.
The sealant must be selected for the expected joint movement and service environment.
Joint dimensions affect the movement capacity and durability of the sealant.
A typical joint-sealing system may include:
Prepared joint faces.
Compatible primer where required.
Closed-cell backing rod or approved bond breaker.
Correct sealant depth.
Continuous sealant application.
Proper tooling and curing.
The sealant should generally bond to the two opposing joint faces rather than the joint base, unless the manufacturer’s approved detail specifies otherwise.
Three-sided adhesion can restrict movement and increase the risk of sealant failure.
The required width-to-depth ratio must follow the selected product’s technical data sheet and the joint design.
| Property | Gun Grade | Pouring Grade |
|---|---|---|
| Consistency | Non-Sag Paste | Flowable |
| Typical Orientation | Vertical and Selected Inclined Joints | Horizontal Joints |
| Application Method | Sealant Gun or Approved Equipment | Pouring or Suitable Dispensing Equipment |
| Joint Preparation | Required | Required |
| Backing Material | As Specified | As Specified |
| Main Applications | Facades, Walls, Precast Joints | Floors, Pavements, Horizontal Joints |
A pouring-grade sealant should not be used in vertical joints unless expressly approved.
| Property | Polysulphide Sealant | Polyurethane Sealant | Silicone Sealant |
|---|---|---|---|
| Polymer | Polysulphide | Polyurethane | Silicone |
| Common Uses | Concrete and Industrial Joints | Construction and Movement Joints | Facades, Glazing and Weather Sealing |
| Chemical Resistance | Formulation dependent | Formulation dependent | Formulation dependent |
| UV Resistance | Grade dependent | Grade dependent | Often Strong in Suitable Grades |
| Paintability | Grade dependent | Grade dependent | Generally Limited |
| Immersion Suitability | Selected Grades | Selected Grades | Selected Grades |
| Movement Capability | Product classified | Product classified | Product classified |
Sealant selection should be based on tested movement capability, substrate adhesion, chemical exposure and the approved joint specification.
Confirm the approved sealant grade and joint dimensions.
Remove loose material, dust, oil and contaminants.
Ensure the substrate meets moisture and temperature requirements.
Install the specified backing rod or bond breaker.
Apply compatible primer where required.
Protect adjacent surfaces from staining.
Use the complete manufacturer-proportioned kit unless otherwise permitted.
Mix the base and curing agent thoroughly.
Follow the recommended mixing equipment and duration.
Avoid introducing excessive air.
Apply the material within its stated pot life.
Fill the joint continuously.
Avoid trapped air and unfilled sections.
Maintain the specified sealant depth.
Tool gun-grade sealant where required.
Prevent leakage when using pouring-grade material.
Avoid application outside the specified temperature range.
Protect the joint from traffic, water and contamination during curing.
Follow the required curing period.
Inspect for adhesion defects, voids and incomplete filling.
Repair defective sections using an approved procedure.
Selected polysulphide sealants may be suitable for joints exposed to water or intermittent immersion.
However, not all formulations are approved for:
Continuous water immersion.
Potable water contact.
Wastewater exposure.
Swimming pools.
Chemical storage structures.
Hydrostatic pressure.
The complete joint system must be designed for the intended exposure. Waterstops, membranes or other waterproofing components may also be required.
Certain polysulphide sealants are selected for resistance to oils, fuels and industrial chemicals.
Chemical compatibility should be checked against:
Chemical identity.
Concentration.
Exposure duration.
Temperature.
Frequency of contact.
Cleaning procedures.
Sealant formulation.
A general chemical-resistance claim should not replace manufacturer-specific compatibility testing.
| Standard | Test / Requirement |
|---|---|
| ASTM C920 | Elastomeric joint sealants |
| ASTM C719 | Adhesion and cohesion under cyclic movement |
| ASTM C794 | Peel adhesion of elastomeric joint sealants |
| ASTM C661 | Indentation hardness of elastomeric joint sealants |
| ASTM C679 | Tack-free time |
| ASTM C1135 | Tensile adhesion properties of structural sealants, where relevant |
| ISO 11600 | Classification and requirements for building construction joint sealants |
| EN 14188-2 | Cold-applied joint sealants for roads and pavements |
Applicability depends on the selected sealant and intended application. Compliance must be supported by manufacturer documentation.
Buyers should confirm:
Joint orientation.
Joint width and depth.
Expected movement.
Substrate type.
Gun-grade or pouring-grade requirement.
Chemical exposure.
Water immersion conditions.
Traffic loading.
Primer requirements.
Pot life and curing time.
Applicable standards.
For critical water-retaining, fuel-exposed or industrial joints, obtain the manufacturer’s written approval for the specific service conditions.
Polysulphide sealants are supplied in manufacturer-standard packaging such as cartridges, sausages or multi-component kits.
The approximate sealant volume for a rectangular joint can be calculated as:
Volume (litres) = Joint width (mm) × Sealant depth (mm) × Joint length (m) ÷ 1,000
For example, a joint measuring 20 mm wide, 10 mm deep and 100 m long requires approximately 20 litres of sealant before allowance for waste.
Actual consumption depends on joint geometry, backing material, surface irregularities and application losses.
Yaseen Construction Products can review sourcing requirements against relevant polysulphide joint-sealant product ranges, including:
Fosroc Thioflex polysulphide sealant products.
Other approved polysulphide joint-sealant manufacturers.
Equivalent products must be compared using movement classification, hardness, adhesion, curing properties, chemical resistance, immersion suitability and applicable standards.
Brand references are for technical comparison and product identification. They do not imply manufacturer affiliation, guaranteed availability or automatic equivalence.
Pricing depends on:
One-component or two-component formulation.
Gun-grade or pouring-grade consistency.
Movement capability.
Chemical resistance.
Packaging size.
Manufacturer.
Order quantity.
Delivery destination.
For accurate quotations, buyers should provide the joint dimensions, total running metres, substrate type, exposure conditions and required sealant specification.
Yaseen Construction Products supplies and exports polysulphide sealants for concrete movement joints, industrial floors, building structures and infrastructure projects across the UAE, Saudi Arabia, Qatar, Oman, Kuwait and African countries, including Nigeria, Kenya, Ghana, Tanzania, Uganda, Ethiopia, South Africa, Egypt, Morocco, Rwanda, Zambia, Mozambique and Senegal.
We support waterproofing contractors, civil engineering companies, industrial flooring specialists, infrastructure developers and procurement teams with specification-based sourcing, bulk quotations and international shipment arrangements.
Product availability, pricing and delivery schedules depend on the selected formulation, packaging, quantity and destination.
Movement Accommodation: Suitable grades accommodate specified expansion and contraction in construction joints.
Flexible Cured Seal: Forms an elastomeric material that can deform within its rated movement limits.
Water Resistance: Properly installed systems help reduce water ingress through compatible joints.
Chemical Resistance Options: Specialised grades resist selected oils, fuels and industrial chemicals.
Gun-Grade Availability: Non-sag formulations support vertical and inclined joint applications.
Pouring-Grade Availability: Flowable formulations support suitable horizontal joints.
Concrete Joint Applications: Commonly used in industrial floors, pavements and structural movement joints.
Substrate Adhesion: Selected products adhere to properly prepared and primed construction surfaces.
Controlled Joint Geometry: Can be installed with compatible backing materials to achieve the required sealant depth.
Immersion-Resistant Grades: Certain formulations are suitable for specified water-exposure conditions.
Repair and Maintenance Use: Can be used in approved joint resealing programmes.
Project-Based Packaging: Multi-component kits support bulk joint-sealing work.
Concrete Expansion Joints: Sealing movement joints between concrete elements.
Industrial Floor Joints: Horizontal joint sealing in factories and warehouses.
Building Facades: Vertical and horizontal movement joints in compatible facade assemblies.
Precast Concrete Panels: Sealing joints between precast elements.
Concrete Pavements: Selected pavement joint-sealing applications.
Parking Structures: Sealing suitable concrete movement joints.
Water Treatment Facilities: Joints requiring approved water-resistant sealant systems.
Water-Retaining Structures: Selected applications using immersion-approved grades.
Infrastructure Construction: Movement joints in civil engineering structures.
Industrial Facilities: Joint sealing where specified chemical resistance is required.
Commercial Buildings: Movement joints in concrete and masonry construction.
Joint Rehabilitation: Replacement of deteriorated sealants in compatible existing joints.
Polysulphide Sealant is used to seal expansion, construction and movement joints in concrete structures, industrial floors, building facades and selected infrastructure applications. It provides a flexible seal designed to accommodate specified joint movement and help restrict water or contaminant ingress.
Gun-grade polysulphide is a non-sag material used in vertical and suitable inclined joints. Pouring-grade polysulphide is flowable and intended for horizontal joints. The correct grade depends on joint orientation, dimensions and the approved application procedure.
Properly specified and installed polysulphide sealant can provide water-resistant joint sealing. However, watertightness depends on joint design, substrate preparation, adhesion, sealant dimensions and exposure conditions. It should not automatically replace a complete waterproofing system.
Selected formulations may be suitable for water-retaining structures, but approval depends on immersion conditions, water chemistry and any potable-water requirements. The manufacturer’s written confirmation should be obtained before use.
Polysulphide and polyurethane sealants use different polymer chemistries. Their movement capability, hardness, chemical resistance, UV performance and immersion suitability vary by formulation. Selection should follow the project specification and manufacturer data.
Some substrates and sealant formulations require a compatible primer to achieve reliable adhesion. Primer selection depends on substrate porosity, moisture conditions and the manufacturer’s recommendations.
Curing time depends on the product formulation, temperature, joint dimensions and whether it is a one-component or two-component system. The manufacturer’s stated pot life, tack-free time and full cure period should be followed.
Certain polysulphide formulations provide resistance to selected oils, fuels and industrial chemicals. Resistance depends on the specific chemical, concentration, temperature and exposure duration. Manufacturer compatibility information is required for chemical-exposed joints.
Allowable joint width and movement depend on the selected sealant’s movement classification and the approved joint design. The required sealant depth and backing arrangement must also be considered.
Yes. Suitable gun-grade polysulphide sealants are designed for vertical and certain inclined joints. Pouring-grade formulations should not be used vertically unless the manufacturer expressly approves the application.
Pricing depends on formulation, movement capability, chemical resistance, gun-grade or pouring-grade consistency, packaging size, manufacturer, order quantity and delivery destination. Buyers should calculate consumption using joint dimensions and the required sealant depth.
Yaseen Construction Products supplies and exports polysulphide sealants for construction, waterproofing, industrial flooring and infrastructure projects across the UAE, Saudi Arabia, Qatar, Oman, Kuwait and African countries, including Nigeria, Kenya, Ghana, Tanzania, Uganda, Ethiopia, South Africa, Egypt, Morocco, Rwanda, Zambia, Mozambique and Senegal.
We assist waterproofing contractors, civil engineering companies, industrial flooring specialists, infrastructure developers and procurement teams with specification matching, bulk quotations and international shipment arrangements.
Trusted supplier and exporter of building construction products in UAE, Saudi, Qatar, Oman & African Countries.
Still confused?
We are happy to help on our expertise with no conditions.